Octave HP 300 SE Expand

Octave HP 300 SE

Octave Octave

Ny

Balanserat rörförsteg med separat strömförsörjning.

Mer detaljer

78 000 kr

inkl.

The HP 300 SE is a enhanced version of the HP 300 MKII. The HP 300 SE does not replace the HP 300 MKII, this model extends our range of Preamps. The HP 300 SE offers more flexibility in the connections and sonic benefits due to some improvements in the Power Supply and the Output stage of the Line Amplifier. The HP 300 SE has two independent XLR Inputs, three RCA Inputs, one Monitor Output, two RCA Outputs and one XLR Output. The Gain is switchable in three steps, this allow to set the optimum Gain and regulation Ratio depending on the efficiency of the Loudspeaker. The new designed Line Amp has a extremely high Signal to Noise Ratio. Noise is not only a characteristic of the tubes, a significant contribution is coming from the mains, respectively the Power supply design of a Preamp. The Power supply of the HP 300 SE consists of the external transformer with optimized isolation characteristic, and the precise ultra low noise Voltage regulators of the main unit. Both systems are match to each and help reducing the Noise of the Lime Amplifier effectively. The Balanced Output is realized with a highly symmetrical Output Transformer. The Transformer offers the possibility to connect or disconnect the Ground connection to the Power Amplifier. The feature helps to reduce disturbing mains induced currents that usually flow in the Ground of the Signal connection. Both Outputs offer very low Output Resistances. Connecting cables up to 5 - 10 meter is without negative influence. A helpful feature in modern Hifi combinations is the Home Theatre Bypass Function. The HP 300 SE offers this feature, with the additional possibility to select the Bypass Input from a RCA Input to a XLR Input. The Monitor Output is buffered and can be used to drive an external headphone Amp, the Analog Input of a Computer or similar. Phono MC is available optional.
 
Basic Model   HP 300 SE, optional: Phono MC
Tube Complement  
Line-Platine: ECC 81 und ECC 88; Phono: ECC 81
Design  
Aluminium silver or Aluminium black

  Specifications      
invi
  Gain high  
25 dB = 18,5
 
  Gain med  
19 dB = 8,8
 
invi
  Gain low   12 dB = 4  
invi
  Frequency Response Gain high   10 Hz - 200 kHz - 1,5 dB  
invi
  Total Harmonic Distortion Gain high   0.03%  
invi
  S / N Ratio : Gain high   - 92 dB  
invi
  S / N Ratio Gain low   -108 dB  
invi
  Left/Right Crosstalk   90 dB 1 kHz  
invi
  Input to Input Crosstalk   100 dB 1 kHz  
invi
  Input Impedance   100 kOhm  
invi
  Output Impedance   50 Ohm cinch; 150 Ohm XLR  
invi
  Channel Balance   0.5 dB - 70 dB  
  Connections  

Inputs : 3 x Cinch, 2 x XLR, 1 x Phono Option

Outputs : 2 x Cinch, 1 x XLR, 1 x Monitor

 
  Features  

HT Bypass, Sym. Inputs and Outputs, Monitor Out

 
invi
  Phono-MC      
invi
  RIAA-Equalization Accuracy  
0,3 dB 15 Hz - 20 kHz
 
invi
  Corner Frequency Subsonic Filter  
15 Hz / - 3 dB
 
invi
  Input Impedance  
30 - 1000 Ohm
 
invi
  Input Sensitivity   0.2 mV / 0.7 mV  
invi
  Gain low   58 dB  
invi
  Gain high   67 dB  
invi
  Signal-to-Noise Ratio (weighted)  
- 75 dB
 
invi
  invi Download:
Owner's Manual
 
invi
  General Facts      
invi
  Power Consumption  
35 W
 
invi
  Weight with Power Supply   12 kg  
invi
  Standard Accessories   Power cord, IR-Remote Control  
invi
  Dimensions   W x H x D = 438 x 77 x 410 mm  
invi
  Dimensions Power Supply   W x H x D = 110 x 80 x 250 mm  

Välkommen in på en kaffe

Helhetstänk från början till slut

Jag förstår

Vi använder cookies för inloggning och kundkorg