Octave HP 700 SE Expand

Octave HP 700 SE

Octave Octave

Ny

Modulärt uppbyggt rörförsteg i referensklass.

Mer detaljer

167 300 kr

inkl.

The Octave HP 700 preamplifier looks back to a long and successful history, the origins of its basic circuitry are derived from the classic HP 500 model, first presented in 1986. This concept has been consistently developed over 30 years and attracted worldwide attention.

Refined tube technology and intelligent modular technology made the HP 700 future-proof right from the start - an innovation in the market. Now it was time to push the innovative HP 700 even further in terms of sound and technology. The new HP 700 SE is a tube preamplifier that features both new precision technology and tonal refinements of the output stage. Like its predecessor, its modular freedom meets the listener's individual demand for truly customized high-end setup. Instead of being bound by the fixed audio and technical parameters of the equipment, listeners can adapt the technology of the HP 700 SE to their individual requirements and preferences.

In the new SE version, there are now two parallel XLR sockets next to the two RCA outputs on the back panel, allowing all types of bi-amping. But the modifications of the actual Class-A-output stage are even more important. The search for the even finer sound took place with the help of extremely time-consuming and complex measurements, along with accompanying listening sessions. These difficult adjustments are responsible for the tonal improvements, especially the mid-tone of the pre-amplifier. The tube configuration remains unchanged compared to the predecessor HP 700, as do all the other tried-and-tested technical refinements o this incomparable preamp:

PRECISION TECHNOLOGY IN THE LINE STAGE

The term "precision technology" stands for a circuit in tube technology that has an extreme bandwidth up to 1 MHz, an impressively low output resistance of 100 ohms and sensationally low distortion of 0.001%. Three amplification settings, combined with selectable output impedance, enable perfect fine-tuning of the HP 700 SE to the characteristics of the sound reproduction chain. The three-stage amplification settings allow optimal matching of the volume control to the efficiency of the speaker.

PSU TECHNOLOGY

In combination with the newly developed, high-precision, low-noise supply-voltage stabilizing circuitry, the separate, magnetically shielded, outboard power supply of the HP 700 SE (essential for the low-noise and low-hum function of the MC-input) ensures constancy of the audio output even when the mains voltage is subject to wide fluctuations and high interference levels. Added to this, the integrated control logic system guarantees maximum operational reliability and, backed by our exclusive soft-start technologies, ensures the tubes and the unit have a life of up to twenty years.

BYPASS

The multi-channel bypass function allows the HP 700 SE to be integrated into an existing home-theater system. The logic-controlled input selector circuitry enables activation of the bypass function for an XLR or RCA input on the preamp's rear panel. The Home Cinema signal is present at all three outputs.

ADDITIONAL INDIVIDUALIZATION OPTIONS: MODULAR INPUTS

The connection possibilities of the generously configured standard HP 700 SE model are rounded off by two user-selectable, optional input modules. An optimized input module can be used for unique applications, for anything from an MC step-up transformer to a transformer-based XLR input module. The plug and play modules can be readily installed or upgraded at any time. PHONO Innovative technology has also been applied in the redesign of the Phono RIAA amplifier. The further development of the RIAA stage has improved the signal/noise ratio, while simultaneously reducing system-related distortion. The widening of the bandwidth enables accurate RIAA equalization and exploits the full potential of analog reproduction. The wide variety of optional input modules ensures that the optimal input can be installed for any cartridge.

TONE CONTROL

PRECISON TONE CONTROL

Another innovation, the optional tone control, rounds off the HP 700 SE modularity. The valve-based, precision tone control unit guarantees consistency of the sound, even at low volume. Precise adjustment of bass and treble, with a 0.3 dB channel separation, allows the tone to be adjusted without impairing the spatial reproduction.

BALANCE CONTROL

The frequency-compensated balance control allows channel-separated volume adjustment in 1 dB steps. This technology eliminates any controller-related sound shifts. Using 12-position stepped switches, the setting is long-time stable, with 100% repeatability.

OUTPUT SELECTOR SWITCH

The HP 700 SE output can be switched to multiple zones by manual activation of the outputs. Whether the output is through XLR, RCA or all three outputs simultaneously, a total of three output stages can be utilized for separate rooms, different speakers or bi and tri-amping.

STEPPED VOLUME CONTROL

The optional, frequency-compensated, 47-position stepped switch ends the debate about the influence of the controller on the quality of the music signal. At 0.1 dB, the channel deviation is supreme. Our own in-house development, the volume control design constantly maintains the frequency bandwidth throughout the entire control range, reducing controller-related distortion to a barely measurable level. However, as a result of the mechanical design of the stepped attenuator, the switch positions cannot be controlled via the remote control.

Obs! Vid val av Phono-moduler krävs även "Option Phono Riaa".

 
Basic Model   HP 700 SE
Design  
Aluminium silver or Aluminium black

  Specifications      
invi
  In- and outputs      
invi
  Inputs  

3 x RCA, 2 x XLR, 2 x arbitrary
1 x Bypass RCA (can be switched to IN4 -XLR)

 
invi
  Outputs   2 x RCA, 2 x XLR, 1 x Monitor / Tape Record (RCA)  
invi
  XLR transmission ratio   0 dB  
invi
  XLR pin assignment   1 = ground, 2 = positive, 3 = negative  
invi
  Line stage      
invi
  Output resistance   100 / 300 ohms RCA; 150 ohm XLR  
invi
  Monitor Out output resistance   240 ohms  
invi
  Maximum output voltage   12V  
invi
  Gain factor Gain High   25 dB = 18,5  
invi
  Gain factor Gain Med   18 dB = 7,8  
invi
  Gain factor Gain Low   12 dB = 4  
invi
  Signal-to-noise ratio Gain High   - 98 dB / 38 µV at 3 V output voltage  
invi
  Signal-to-noise ratio Gain Med   - 104 dB / 18µV at 3 V output voltage  
invi
  Signal-to-noise ratio Gain Low   - 110 dB / 8 µV at 3 V output voltage  
invi
  Equivalent noise-level   14 nV √Hz  
invi
  Frequency response Gain High-RCA   10 Hz – 200 kHz  -0,7 dB, 0,7 Mhz -6 dB  
invi
  Frequency response Gain Med-RCA   10 Hz – 200 kHz  -0,3 dB, 1.3 MHz -6 dB  
invi
  Frequency response Gain Low-RCA   10 Hz – 200 kHz  -0,2 dB, 2,1 MHz -6 dB  
invi
  Frequency response XLR   10 Hz – 200 kHz  -1,5 dB  
invi
  Ramp-up time Gain Low   250 ns  
invi
  Ramp-up time Gain Low   60 V/µs  
invi
  Total harmonic distortion, Gain Low, Med, High   0.01% at 3V on 10 kOhm  
invi
  Channel separation   -90 dB / 1 kHz, Input short-circuited  
invi
  Crosstalk between inputs   - 80 dB / RCA, -95 dB XLR / 1kHz  
invi
  Input resistance   50 kOhm  
invi
  Channel matching via volume control   0,5 dB - 70 dB  
invi
  Phono      
invi
  RIAA equalization tolerance   0,3 dB / 15 Hz - 20 kHz  
invi
  Corner frequency - subsonic filter   15 Hz / - 3 dB  
invi
  Signal-to-noise ratio   - 75 / - 84 dB / with IN 2 MC Input  
invi
  Input sensitivity   250 µV / 600 µV / with IN 2 MC Input  
invi
      Input sensitivity, gain and input resistance depend on input module  
invi
  Gain MC Gain Low - Pre Out   Gain Low: 70 dB, Med: 77 dB, High: 83 dB  
invi
  Gain MC Gain High- Pre Out   Gain Low: 79 dB, Med: 86 dB, High: 92 dB  
invi
  invi Download:
Owner's Manual
 
invi
  General Facts      
invi
  Power consumption  
35 - 60 W
 
invi
  Weight preamplifier   10 kg  
invi
  Weight power supply   3,8 kg  
invi
  Supplied accessories   Power calbe, remote control  
invi
  Dimensions of preamplifier (over-all)   462 x 130 x 480 mm (W x H x D)  
invi
  Dimensions of power supply (over-all)   110 x 90 x 277 mm (W x H x D)  
invi
  Dimensions (in mm)
invi
bild
invi
   
invi
» The HP 700 SE is equipped with two RCA and XLR outputs.
» The XLR output is transformer balanced and galvanically isolated.
» Soft start for heating, power supply and signal output; providing maximum tube life and trouble-free switching on and off.
» The gain of the Line-stage can be switched in three levels.
» External power supply with multiple shielded power transformer and integrated mains filter.
 

 

Frequency response:

invi invi
  bild
invi invi
 
  Frequency response and gain of line stages in Gain Low (12 dB), Med (18 dB), and High (25.5 dB) settings.
invi invi
 

 

Line stage hum and noise level:

invi invi
  bild
 
  No mains interference can be detected during noise level measurement either; the noise level decreases linearly by 6 dB for each gain setting.
invi invi
 

 

FFT interference spectrum:

invi invi
  bild
 
  Comparison of the RCA and XLR interference spectrum. No mains interference on either of the inputs; the spectrum of the harmonics K2, K3, K4, K5, K6 decreases consistently linearly for both outputs.
invi invi
 

 

Phono frequency response with and without subsonic filter:

invi invi
  bild
 
  The frequency range without subsonic filter is very linear and extremely low (red graph). With the subsonic filter (cyan graph), bass reproduction is not limited by the low corner frequency (-3 dB at 15 Hz).
invi invi
 

 

Control characteristics of the tone control:

invi invi
  bild
 
  The control range encompasses the area between the red and blue graphs. The precisely adjustable controls allow for settings in the 1 dB range based on the scale. One scale mark corresponds to +/- 4 dB.
invi invi
 

 

Control range and balance control frequency response:

invi invi
  bild
 
  The compensated balance pre-control exhibits virtually the same frequency response with all settings.

Välkommen in på en kaffe

Helhetstänk från början till slut

Jag förstår

Vi använder cookies för inloggning och kundkorg