This VM95 Series cartridge with 3.0 mil conical stylus fits half-inch mount turntables. While this cartridge is designed to play 78 RPM mono records, it is, nevertheless, a stereo cartridge, allowing users to choose between the left and right channels, which can be especially helpful in archiving applications to minimize noise and distortion. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli.

Cartridge & Stylus
Frequency Response	20 - 20,000 Hz
Vertical Tracking Angle	23°
Vertical Tracking Force	4.5 to 5.5g (standard 5.0g)
Stylus Construction	Bonded Round Shank
Recommended Load Impedance	47,000 Ω
Coil Impedance	3.3 kΩ (1 kHz)
DC Resistance	485 Ω
Coil Inductance	550 mH (1 kHz)
Output Voltage	2.7 mV (@ 1 kHz, 5 cm/sec)
Output Channel Balance	1.5 dB (1 kHz)
Stylus Shape	SP 3 mil Conical Bonded
Cantilever	Aluminium Pipe
Static Compliance	12 x 10 – 6 cm / dyne
Dynamic Compliance	2 x 10 – 6 cm / dyne (100 Hz)
Mounting	1/2” centres
Cartridge Weight	6.1g
Dimensions	17.2 x 18.9 x 28.3 ( H x W x D mm)
Accessories Included	Two 11 mm installation screws; Two 8 mm installation screws; Two washers
Model	AT-VM95SP
Recommended Load Capacitance	100-200 pF
Replacement Stylus	AT-VMN95SP
Stylus Size	3 mil
Type	VM Stereo Dual Magnet
Wire Used for Coil	T.P. Copper